New to service; but not to voip |
|
This is my initial post so my thanks to all who've posted here and helped me get my configuration live.
I've assigned DIDs from three providers, Flowroute, Voip.ms, and Vitelity. The first two use SIP URIs to route their DIDs and the last requires registration.
DIDs come into a default trunk that feeds a couple of time-dependent IVRs.
DID from Flowroute does not show up and I get a busy signal. I've sent in a support request to them. DID calls from them do not show up on either log. Might be a carrier (Level3) issue.
I'm only using Flowroute for termination at present and it works as advertised and their CDRs show usage.
wav and mp3 uploads worked well.
Unresolved:
Email of received voice mail does not go out nor is any activity in this direction indicated in the logs.
Any wisdom toward correcting this would be appreciated.
Thanks.
UPDATE
DID from Flowroute not working was solved by changing the routing at their end from SIP URI (identical URI to the one working with voip.ms) to Register.
I submitted a sip trace in closing their ticket in case it was on their end. Looked that way to me but I'm not a voip engineer.
Voice mail sent via email still not working.
This post has been edited 1 time(s), it was last edited by fon on 14.04.2014 at 06:59.
|